The User Menu can be very useful as the default ‘Main Menu’ can be difficult to navigate and is sometimes confusing to new users.
By default the User Menu is empty and only accessible from ‘Main menu>OSD parameters>User Menu’.
Before you use it you need to assign menu items to it and (optionally) set shortcut to access it.
Editing the User Menu
- In <ALT> mode press to enter the CHDK Main menu and navigate to “OSD parameters”.
- Set the “User Menu Enable" option to "Edit". Now although nothing appears to have changed you are actually in "Edit" mode!
- Now by selecting any menu item on any of the menus and pressing the button (or on some cameras) you will be adding the selected item to the "User menu". You will see an "Acknowledge Pop-up" window after you add each menu entry.
- Repeat the last step to add further menu items as required.
- When you have finished navigate back to “Main menu>OSD parameters>User Menu”. You should now see all the items you added to your menu (plus a link back to the main menu). Note you are still in 'Edit Mode'.
- If you want to delete any of the items you added, go the User Menu while still in "Edit Mode" and select that item. Press the button (or on some cameras) and the entry will be delted.
- If you want to rearrange an item on your menu, select that item and use the and buttons to move the item up or down in the menu list.
- When you are finished editing, remember to set "User Menu Enable" to something other than "Edit".
Using the User Menu
Navigate back to “Main menu>OSD parameters” and set the “User Menu Enable" option as desired. Options are:
- 'Edit' - Turns on 'Edit mode' (described above).
- 'On Dire(ct)' – User menu displays immediately on entering <ALT> mode (does not require the key to be pressed)
- 'On' – After entering <ALT> mode :
- when “User Menu as Root” is 'disabled' the user menu is displayed by pressing + .
- when "User Menu as Root” is 'enabled' the user menu displays by pressing (the ‘Main menu’ is now accessed by pressing + ).
- ‘Off’ – User menu is only accessible via “Main menu>OSD parameters>User Menu”
Some CHDK features require two or more options that work together. An example, "Override Shutter Speed" might also need its associated "Value Factor" selection and the "Shutter Speed Enum Type" if you frequently change that too. Be sure to copy any related menu items together so they are still available where you need them in your custom menu.