These old models '''will never be supported''' by CHDK because of their architecture, the current builds of CHDK need at least a [[Glossary#Digic|Digic]] '''II''' or Digic '''III''' image processor.
These old models '''will never be supported''' by CHDK because of their architecture, the current builds of CHDK need at least a [[Glossary#Digic|Digic]] '''II''' or Digic '''III''' image processor.
−
*S1IS
*Pro1
*Pro1
*G3
*G3
Line 56:
Line 55:
Some information on hacking DIGIC I http://rayer.ic.cz/hardware/a70.htm (in Czech) http://rayer.ic.cz/hardware/canon/ps-hacks/ps-hacks.htm (other information, English)
Some information on hacking DIGIC I http://rayer.ic.cz/hardware/a70.htm (in Czech) http://rayer.ic.cz/hardware/canon/ps-hacks/ps-hacks.htm (other information, English)
−
===S1 IS===
−
Seems to be an exception, not the usual x86 CPU with DOS: Main CPU is ARM, firmware starts at 0xFF010000, OS is Vxworks 5.5. Unfortunately the code is very different. According to the strings it supports [[Canon Basic]]. Information was obtained from the official firmware upgrade file with fwdecun2 found [http://rayer.ic.cz/hardware/canon/ here] Many strings in the firmware use terminology only found in Canon DSLRs. The DSP (core) is JP51 (DIGIC II is JP52).
[[Category:Help]]
[[Category:Help]]
Revision as of 04:05, May 27, 2012
The following page is dedicated to Canon Cameras that are not and never will be supported by CHDK:
To see cameras that it is possible to run CHDK on and cameras that are already ported or in the process of being ported please visit the for developer page.
These very old models will never be supported by CHDK because of their architecture, CHDK in the current builds need at least a Digic II or Digic III image processor.
G1
G2
Pro70
Pro90 IS
S10
S20
S30
S300
S330
S40
Digic I
These old models will never be supported by CHDK because of their architecture, the current builds of CHDK need at least a DigicII or Digic III image processor.
