Ad blocker interference detected!
Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers
Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.
EV bracketing with TV and AV commands Edit
Rem written for A710is by Stebu
There are several commands for getting and setting the aperture and the speed. They only work in Manual mode; well you can change the settings in any mode, but they are effective in manual mode, probably also in Av and Tv modes). The commands are
get_tv target set_tv_rel val set_tv val get_av target set_av_rel val set_av val
Target is the name of a variable (a, b, ..z), val is an expression. I used the following script to study the behaviour of these commands. a controls the execution a=0 reads the current settings, =1 sets Tv=b, =2 sets Av=c, =3 sets both and changes the screen display by performing half_click. a=4 runs the bracketing scritp and takes three shots with -2/3, 0 and + 2/3 corrections to the existing manual settings.
On my camera these seem to work.
rem A710is, Stebu, 17.05.2007 rem testing av and tv commands, use Manual mode @title TV_AV test @param a get setTv Av set_get brkt @default a 0 @param b TV @default b 20 @param c AV @default c 10 @param d delay (10ms) @default d 10 if a=0 then goto "read" if a=1 then goto "set_tv" if a=2 then goto "set_av" if a=3 then goto "set_get" goto "bracket" :set_get set_av c set_tv b print "AV,TV set to",c,b sleep 1000 click "shoot_half" sleep 10*d goto read :read get_av n get_tv m print "AA,TV got",n,m end :set_av set_av c print "AV set to",c end :set_tv set_tv b print "TV set to",b end :bracket rem increase light (1/3+1/3 steps) set_tv_rel 0-1 set_av_rel 0-1 shoot sleep 10*d rem decrease light to original set_tv_rel 1 set_av_rel 1 shoot sleep 10*d rem decrease light set_tv_rel 1 set_av_rel 1 shoot sleep 10*d rem back to original settings? set_tv_rel 0-1 set_av_rel 0-1 click "shoot_half" end