m (→Firmware dumps for Developers: This is a a sub of the "For developers" section ;)) |
|||
Line 55: | Line 55: | ||
''This section describes special CHDK-related things...'' |
''This section describes special CHDK-related things...'' |
||
+ | *When powered on in playback mode, just press the {{button|shutter button}} full or halfway once to switch to record mode |
||
+ | *To turn the camera on directly in record mode, hold the {{button|POWER}} button for 1 second |
||
+ | *To enable the DNG support follow the little guidance from the [http://chdk.setepontos.com/index.php/topic,2468.msg30870.html#msg30870 forum] |
||
==For Developers== |
==For Developers== |
Revision as of 20:49, 11 September 2011
The Powershot SX 30 IS is the successor to the SX20 IS.
CHDK is available for the Powershot SX30 with firmware versions 1.00E, 1.00H, 1.00L and 1.00N from the Download page. (Cameras with firmware version 1.00M can use the 1.00L version of CHDK.) |
Reviews
Technical Data
- Digic IV image processor
- DryOS operating system
- 14.1 megapixel CCD sensor, 1/2.3 inch
- 35x wide-angle optical zoom lens 24- 840mm, F2.7 - F5.8
- Image stabilization (lens shift-type)
- Display: 2.7 inch vari-angle LCD, 230,000 pixels
- Electronic viewfinder 202.000 pixels
- Built-in pop up flash, hot-shoe for external flash
- Video: 1280 x 720 @30 fps, 640 x 480 @30 fps, 320 x 240 @30 fps, Miniature Effect (HD, L) 6 fps, 3 fps, 1.5 fps
- HDMI output
- Storage: SD, SDHC, SDXC, MMC, MMCplus, HCMMCplus
- Power: Rechargeable Li-ion Battery NB-7L (battery and charger included)
- Dimensions: 123 x 92 x 108 mm, Weight: 601g (with battery)
Firmware info
The ver.req file method is used to gather firmware information about this camera model.
Ver.req First Page Data: After holding down FUNCSET then press DISP:
European PAL Version Header
Canon PowerShot SX30 IS P-ID: 3210 NT D Firmware Ver GM1.00H
Adj Ver.011.001 Mecha Firm Ver 3.03
USA Version Header
P-ID: 3210 NT D
Firmware ver GM1.00L
Adj ver.011.001
CHDK Specialities
This section describes special CHDK-related things...
- When powered on in playback mode, just press the shutter button full or halfway once to switch to record mode
- To turn the camera on directly in record mode, hold the POWER button for 1 second
- To enable the DNG support follow the little guidance from the forum
For Developers
LED addresses
0xC0220134 Power LED (green)
Firmware dumps
- SX30 firmware version 1.00H: mediafire DL link
- SX30 firmware version 1.00L: Zshare DL Link
- SX30 firmware version 1.00M: zSHARE DL Link
- SX30 firmware version 1.00N: dropbox link
- SX30 firmware version 1.00P: zSHARE DL Link
Download location for firmware dumps: |
Porting process & links
- Porting in progress. CHDK booting succesfully. Can create a RAW image file. Some scripts working. Screen redraw/refresh not reliable yet (menus disappear, Canon display not properly refreshed). Forum Link.
- Beta release available for firmware 1.00E, 1.00H and 1.00L. Forum Link