The Powershot SX260 HS is the successor to the SX230 HS.
CHDK is not yet available for the SX260 HS
|
Reviews
Technical Data
- Digic V image processor
- DryOS operating system (ver 2.3 Rev #50)
- Sensor: effective 12.1 Megapixel, 1/2.3-inch CMOS type, approx. 12.8 Megapixels total
- Focal Length: 4.5mm (W) - 90.0 mm (T) (35mm film equivalent: 25-500mm)
- Display: 3.0-inch TFT LCD, 461,000 dots
- Optics: F/3.5 (W) - F/6.8 (T)
- Built-in Flash
- Speed: Continuous Shooting: Normal: 2.4 shots/sec. in P mode, 10.3 shots/sec. in High-speed Burst HQ mode
- Storage Media: SD Memory Card, SDHC Memory Card, SDXC Memory Card
- Video format: MOV (Quicktime) format H.264, 2-channel stereo linear PCM audio
- Video: 1920x1080 (24 fps) ,1280x720 (30 fps), 640x480 (30 fps, 120 fps slo-mo), 320x240 (240 fps slo-mo)
- Video Out: NTSC/PAL (dedicated connector (female) with unified type of digital, audio and video), Mini-HDMI connector
- Audio Out: Stereo (dedicated connector (female) with unified type of digital, audio and video)
- Power: Battery Pack NB-6L, optional Compact Power Adapter CA-DC10
- Shooting Capacity: Approx. 230 shots
- Dimensions (W x H x D): 4.19 x 2.40 x 1.29 in. / 106.3 x 61.0 x 32.7mm
- Weight: 8.15 oz. / 231g (including the battery and memory card), 7.34 oz. / 208g (camera only)
Specifications Links
Firmware info
The ver.req file method is used to gather firmware information about this camera model.
Canon PowerShot SX260 HS P-ID:3244 NT D Firmware Ver GM1.00B (1.0.0.0)
Adj Ver.005.011 Serial No. XXXXXXXXXXXX Build: Jan 6 2012 17:07:27 NoError Mecha Firm Ver. 3.00 MechaDSP Firm Ver. 0.00
Firmware Dumps
- SX260 HS fw 1.00B (16mb, dumped with cBasic udumper by schapman): box.net dl link, [1]
Download location for firmware dumps: |
CHDK Specialties
This section describes special CHDK-related things...
Shortcuts:
For Developers
General info:
- DryOS v2.3, release #0050
- FW start address: FF000000
LED addresses
First, enable control by writing 0x46 to the following addresses
0xC022C200 <-- Required for AF Beam control to work 0xC0223000 <-- Required for I/O LED control to work 0xC0223070 <-- Required for I/O LED control to work
After doing this, these are the on/off addresses
0xC0223030 <-- AF Beam 0xC022C028 <-- I/O LED
Write 0x46 to light the LED, 0xCF to turn it off.
Writing 0x44 will turn off the AF beam, but it won't turn off the I/O LED. 0xCF works for both.
Porting process & links
- SX260 porting thread: http://chdk.setepontos.com/index.php?topic=7889.msg83278#msg83278