Wikia

CHDK Wiki

SX260

Talk8
572pages on
this wiki
Revision as of 22:32, December 4, 2012 by 205.240.253.201 (Talk)

The Powershot SX260 HS is the successor to the SX230 HS.

Notice

Alpha CHDK builds are available for the SX260 HS firmware versions 1.00B, 1.00C and 1.01A from the Download page

Reviews


Technical Data

  • Digic V image processor
  • DryOS operating system (ver 2.3 Rev #50)
  • Sensor: effective 12.1 Megapixel, 1/2.3-inch CMOS type, approx. 12.8 Megapixels total
  • Focal Length: 4.5mm (W) - 90.0 mm (T) (35mm film equivalent: 25-500mm)
  • Display: 3.0-inch TFT LCD, 461,000 dots
  • Optics: F/3.5 (W) - F/6.8 (T)
  • Built-in Flash
  • Speed: Continuous Shooting: Normal: 2.4 shots/sec. in P mode, 10.3 shots/sec. in High-speed Burst HQ mode
  • Storage Media: SD Memory Card, SDHC Memory Card, SDXC Memory Card
  • Video format: MOV (Quicktime) format H.264, 2-channel stereo linear PCM audio
  • Video: 1920x1080 (24 fps) ,1280x720 (30 fps), 640x480 (30 fps, 120 fps slo-mo), 320x240 (240 fps slo-mo)
  • Video Out: NTSC/PAL (dedicated connector (female) with unified type of digital, audio and video), Mini-HDMI connector
  • Audio Out: Stereo (dedicated connector (female) with unified type of digital, audio and video)
  • Power: Battery Pack NB-6L, optional Compact Power Adapter CA-DC10
  • Shooting Capacity: Approx. 230 shots
  • Dimensions (W x H x D): 4.19 x 2.40 x 1.29 in. / 106.3 x 61.0 x 32.7mm
  • Weight: 8.15 oz. / 231g (including the battery and memory card), 7.34 oz. / 208g (camera only)

Specifications Links


Firmware info

The ver.req file method is used to gather firmware information about this camera model.

Canon PowerShot SX260 HS
P-ID:3244 NT D
Firmware Ver GM1.00B (1.0.0.0)
Adj Ver.005.011
Serial No. XXXXXXXXXXXX
Build: Jan 6 2012  17:07:27
NoError
Mecha Firm Ver. 3.00
MechaDSP Firm Ver. 0.00


CHDK Specialties

This section describes special CHDK-related things...

Shortcuts:

To get into the CHDK menu while in camera mode, press the playback button (▸). To enter playback mode press and hold the playback button (▸).

For Developers

General info:

  • DryOS v2.3, release #0050
  • FW start address: FF000000
  • FI2KEY is @ FFFF3CE0 , and is the same as Sx40 like other "d4c"
    and FI2IV is @FF657B44
  • new dancing bits { 6,3,1,0,5,7,2,4 } , located @ 0xFF5AAB0C

Firmware Dumps

  • SX260 fw 1.00B (16mb, dumped with cBasic udumper by schapman): box.net dl link, [1]
  • SX260 fw 1.00C by kriktsemaj99 ([2])
  • SX260 fw 1.01A by jasaczek ([3])
Saveas64

Download location for firmware dumps:
P&S firmware dumps mirror

LED addresses

  • First, enable control by writing 0x46 to the following addresses:
0xC022C200 <-- Required for AF Beam control to work
0xC0223000 <-- Required for I/O LED control to work
0xC0223070 <-- Required for I/O LED control to work
  • after doing this, these are the on/off addresses:
0xC0223030 <-- AF Beam
0xC022C028 <-- I/O LED
  • Write 0x46 to light the LED, 0xCF to turn it off.
  • Writing 0x44 will turn off the AF beam, but it won't turn off the I/O LED. 0xCF works for both.


Porting process & links

Around Wikia's network

Random Wiki