Changes: SD980IS

Revision as of 21:34, 17 September 2009

The Canon Powershot SD980 IS (IXUS 200 IS in europe, IXY DIGITAL 930 IS in japan) was released on August 19'th, 2009

CHDK is NOT available for the powershot SD980 IS (IXUS 200 IS).

Digic IV image processor
DryOS operating system
12.1 megapixel CCD sensor, 1/2.3 inch (pixel density: 35 MP/cm²), new 12 bit type
Image size: 4000 x 3000 (JPG max.)
5x wide-angle (24mm) optical zoom lens 24-120mm (35mm equiv), F/2.8 - F/5.9
Image stabilization (lens shift-type)
Display: 3 inch touch screen, 230,000 pixels
no optical viewfinder
ISO 80-1600, limited ISO 3200 mode with fixed resolution, auto exposure, white balance, etc.
Flash: built-in, no hot-shoe
Video: 1280x720 @30fps (720p HP), 640x480 @30fps, 320x240 @30fps, format: MOV [H.264 + linear PCM (monaural)]
Storage: SD, SDHC, MMC, MMCplus, HC MMCplus
Connectivity: USB, HDMI mini, AV out (combined plu AV+HDMI)
Power: Canon NB-6L rechargeable Li-ion battery
Weight (without battery): 130g, Dimensions: 100x53x23 mm

FW info from dump:

Jul 17 2009
15:49:34
Firmware Ver GM1.00C

This section describes special CHDK-related things...

#define LED_AF 0xC0223030

Firmware 1.00C, blinked out by raduP (forum link), small 4MB dump: megaupload link, also available from chdkdumps part2.

Download location for firmware dumps:
→ P&S firmware dumps mirror

@@ Line 79: / Line 79: @@
 ===Firmware dumps===
+* Firmware 1.00C, blinked out by raduP ([http://chdk.setepontos.com/index.php/topic,288.msg39894.html#msg39894 forum link]), small 4MB dump: [http://www.megaupload.com/?d=C4T9I7CW megaupload link], also available from chdkdumps part2.
-* There are NO firmware dumps available for this camera yet
 {{DL_dumps}}