CHDK Wiki
Advertisement

The Canon IXUS 100IS (Europe) / PowerShot SD780IS (North America) / IXY DIGITAL 210IS (Japan) is the successor of the PowerShot SD770.

Notice

CHDK is available for the IXUS 100 / SD780 with firmware version 1.00C in beta state from the download page

Sd780is all

Powershot SD780 IS All Color Options

PowerShot SD780 IS front

Powershot SD780 IS Front

PowerShot SD780 IS back

Powershot SD780 IS Back

Reviews

Technical data

Camera specifications: SD780IS@Canon USA

  • Sensor: 12.1 million effective pixels, 1/2.3" CCD type
  • DigiC IV image processor
  • DryOS operating system
  • Lens: 33 - 100mm (35mm equiv), 3x optical zoom, F3.2 - 5.8
  • Image stabilization (lens shift type)
  • Display: 2.5" TFT, 230,000 pixels
  • Optical viewfinder
  • Video: 1280 x 720 @ 30fps [HD], 640 x 480 @ 30fps [L], 320 x 240 @ 30fps [M]
  • Video format: MOV (H.264 + Linear PCM (Monaural)), up to 4GB or 1/2 hour in [HD] or 4GB / 1 hour in [L] or [M]
  • Storage: SD, SDHC, MMC, MMCplus, HC MMCplus
  • Battery: Canon Li-ion Battery NB-4L
  • Dimensions: 87 x 56 x 18 mm, Weight: 115g without battery
  • Speed: Approx 0.8 fps continuous shooting
  • Special features: HDMI connector, accelerometer

Version information

Note that there must be at least one photo stored on your SD card for firmware display to work correctly.

Created ver.req (responds to either ver.req or vers.req), go into playback mode, then pressed FUNCSET and DOWN simultaneously:

Version 1.00c

Canon PowerShot SD780 IS
P-ID:31C2 NT D

Firmware Ver GM1.00C
NoError
Jan 13 2009 08:18:45

or

Canon DIGITAL IXUS 100 IS
P-ID:31C2 PAL D

Firmware Ver GM1.00C
NoError
Jan 13 2009 08:18:45

Pressing DOWN once again with FUNCSET still pressed:

Adj Ver.004.008

Pressing DOWN a third again with FUNCSET still pressed:

  • when using ver.req:
IS Firm Ver. 2.06
IS Param Ver. 2.06
  • when using vers.req:
Total Shoot: 161
Zoom Retry Count: 0
Mecha Condition: 0x00000000

Pressing DOWN a last time with FUNCSET still pressed:

Driver Info: 0x00000000		

Version 1.00b

 Canon PowerShot SD780 IS
 P-ID:31C2 NT D
 
 Firmware Ver GM1.00B
 NoError
 Dec 19 2008 14:24:25
 Adj Ver.004.008

 IS Firm Ver. 2.06
 IS Param Ver. 2.06

 Driver Info: 0x00000000

For Developers

Firmware dumps

Progress:

  • Camera responds to encoded DISKBOOT.BIN on bootable FAT16, but UDumper (NewDryOS) from CartTricks 1.44 does not write on card.
  • Camera will boot PS.FI2 file. Have discovered first LED.
  • AF LED found. Blinker circuit built; initial tests look good for first attempts at blinker firmware dump.
  • FW dump complete - will find home for it shortly.
  • Initial port underway.

Dumps:

  • Firmware 100C (8M Full Dump, by HarpoMa): direct DL link and also from the chdkdumps2 drop
Saveas64

Download location for firmware dumps:
P&S firmware dumps mirror


LED addresses

0xC0220128  Right Side Indicator Light (orange=0x46)
0xC0223030  Auto-focus LED (very bright...)


Porting

  • 13-March-2010: the Ixus 100 / SD780 1.00C port is now in the official CHDK trunk, changeset #876
  • The Ixus 100 / SD780 1.00C port was done by HarpoMa
  • The SD780 1.00C porting thread (by HarpoMa) is here: forum link
Advertisement