(→For Developers: forum link in porting table) |
|||
Line 32: | Line 32: | ||
* Dimensions: 87 x 56 x 18 mm, Weight: 160g without battery |
* Dimensions: 87 x 56 x 18 mm, Weight: 160g without battery |
||
* Speed: Approx 0.8 fps continuous shooting |
* Speed: Approx 0.8 fps continuous shooting |
||
− | * Special features: HDMI connector |
+ | * Special features: HDMI connector, accelerometer |
==Version information== |
==Version information== |
Revision as of 05:13, 7 September 2009
The Canon IXUS 100IS (Europe) / PowerShot SD780IS (North America) / IXY DIGITAL 210IS (Japan) is the successor of the PowerShot SD770.
CHDK is NOT ported to the SD780 yet, there's NO CHDK version available ! |
Reviews
Technical data
→ Camera specifications: SD780IS@Canon USA
- Sensor: 12.1 million effective pixels, 1/2.3" CCD type
- DigiC IV image processor
- DryOS operating system
- Lens: 33 - 100mm (35mm equiv), 3x optical zoom, F3.2 - 5.8
- Image stabilization (lens shift type)
- Display: 2.5" TFT, 230,000 pixels
- Optical viewfinder
- Video: 1280 x 720 @ 30fps [HD], 640 x 480 @ 30fps [L], 320 x 240 @ 30fps [M]
- Video format: MOV (H.264 + Linear PCM (Monaural)), up to 4GB or 1/2 hour in [HD] or 4GB / 1 hour in [L] or [M]
- Storage: SD, SDHC, MMC, MMCplus, HC MMCplus
- Battery: Canon Li-ion Battery NB-4L
- Dimensions: 87 x 56 x 18 mm, Weight: 160g without battery
- Speed: Approx 0.8 fps continuous shooting
- Special features: HDMI connector, accelerometer
Version information
Created ver.req
(responds to either ver.req or vers.req), go into playback mode, then pressed FUNCSET and DOWN simultaneously:
Version 1.00c
Canon PowerShot SD780 IS P-ID:31C2 NT D Firmware Ver GM1.00C NoError Jan 13 2009 08:18:45
or
Canon DIGITAL IXUS 100 IS P-ID:31C2 PAL D Firmware Ver GM1.00C NoError Jan 13 2009 08:18:45
Pressing DOWN once again with FUNCSET still pressed:
Adj Ver.004.008
Pressing DOWN a third again with FUNCSET still pressed:
- when using ver.req:
IS Firm Ver. 2.06 IS Param Ver. 2.06
- when using vers.req:
Total Shoot: 161 Zoom Retry Count: 0 Mecha Condition: 0x00000000
Pressing DOWN a last time with FUNCSET still pressed:
Driver Info: 0x00000000
Version 1.00b
Canon PowerShot SD780 IS P-ID:31C2 NT D Firmware Ver GM1.00B NoError Dec 19 2008 14:24:25
Adj Ver.004.008 IS Firm Ver. 2.06 IS Param Ver. 2.06 Driver Info: 0x00000000
For Developers
Firmware dumps
Progress:
- Camera responds to encoded DISKBOOT.BIN on bootable FAT16, but UDumper (NewDryOS) from CartTricks 1.44 does not write on card.
- Camera will boot PS.FI2 file. Have discovered first LED.
- AF LED found. Blinker circuit built; initial tests look good for first attempts at blinker firmware dump.
- FW dump complete - will find home for it shortly.
- Initial port underway.
[1] Firmware 100C
LEDs
0xC0220128 Right Side Indicator Light (orange=0x46) 0xC0223030 Auto-focus LED (very bright...)
Porting
Initial Work