- 0 Talk
-
SD1300IS
The Powershot SD1300 IS, also known as IXUS 105.
|
CHDK is NOT available for the powershot SD1300 IS. (You can find some test versions on the porting thread below) |
|
Reviews
Edit
Technical DataEdit
- Digic IV image processor
- DryOS operating system
- Specifications: Canon (english), DPReview Press Release with Specifications
Firmware info Edit
The ver.req file method is used to gather firmware information about this camera model.
Version 1.00B
Canon PowerShot SD1300 IS P-ID : 31F4 NT D Firmware Version GM1.00B (1.0.0.0) Adj Ver.006.010
Ver.req Second Page Data: After holding down FUNCSET then pressing DISP twice.
Version 1.00B
Build No: Nov 2009 E18 ZoomLensError 2010.03.12 11:17:12
Ver.req Third Page Data: After holding down FUNCSET then pressing DISP three times:
Version 1.00B
Mecha Firm Ver. 3.01 MechaDSP Firm Ver. 1.03
Vers.req First Page Data: After holding down FUNCSET then pressing DISP:
Version 1.00C
Canon PowerShot SD1300 IS P-ID : 31F4 NT D Firmware Version GM1.00C (1.0.0.0) Adj Ver.006.010
Ver.req Second Page Data: After holding down FUNCSET then pressing DISP twice.
Version 1.00C
Build No: Jan 7 2010 13:33:51 No Error
Ver.req Third Page Data: After holding down FUNCSET then pressing DISP three times:
Version 1.00C
Total Shoot: 0 Zoom Retry Count: 0 Mecha Condition: 0x00000000
Ver.req Fourth Page Data: After holding down FUNCSET then pressing DISP four times:
Version 1.00C
Mecha Firm Ver. 3.01 MechaDSP Firm Ver. 1.03 Driver Info: 0x000000
Vers.req First Page Data: After holding down FUNCSET then pressing DISP:
Version 1.00D
Canon PowerShot SD1300 IS P-ID:31F4 NT D Firmware Ver GM1.00D (1.0.0.0) Adj Ver.006.010
Ver.req Second Page Data: After holding down FUNCSET then pressing DISP twice.
Version 1.00D
Build No: Mar 26 2010 14:51:06 No Error
Ver.req Third Page Data: After holding down FUNCSET then pressing DISP three times:
Version 1.00D
Mecha Firm Ver. 3.01 MechaDSP Firm Ver. 1.03
CHDK SpecialtiesEdit
This section describes special CHDK-related things...
For DevelopersEdit
- Porting Thread: http://chdk.setepontos.com/index.php?topic=5720
What can i do to further this process along, i have the camera but little programming knowledge. I can provide testing and etc if need be. please let me know, at bentz637@gmail.com
General info:Edit
- dancingbits flavour: cool ranch (dryos r43) --> use NEED_ENCODED_DISKBOOT=4 encoding setting in the platform makefile.inc
LED addressesEdit
0xc0220010 orange led 0xc02200a4 flash control 0xc02200ac AF led 0xc0220108 green led
Available firmware dumpsEdit
- fw version 1.00C & 1.00D
|
Download location for firmware dumps: |
Porting process & linksEdit
- firmware dump for fw 1.00D, LED addresses & dancingbits setting: [1]
- Stereo Data Maker(SDM) supports this camera http://stereo.jpn.org/eng/sdm/index.htm
History & News on SD1300 IS: Edit
- (08-Feb-2010) Canon press release of new camera
