Ad blocker interference detected!
Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers
Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.
This is a standard test script included in the full CHDK distribution. It is used to verify the correct functioning of the capture mode control and play/record control APIs, as well as the capmode module.
The script has 3 modes, selected by setting 0-3 in the first option.
- 0 Batch test
- 1 Interactive Menu
- 2 Single test
Batch test modeEdit
Attempts to set each mode in the cameras modemap, and records the results to A/setmode.log
If the camera is started in play mode, the script switches to record mode before starting the test, and switches back to play when done.
The log format is
<action> | <modename> <chdkmode> <canonmode> <play/still/video> <time> <result>
SET RECORD | VIDEO_STD 9 2593 VID 1440ms sleep 47 OK ... TRY VIDEO_COMPACT 11 | VIDEO_COMPACT 11 2595 VID 630ms OK TRY VIDEO_MY_COLORS 12 | VIDEO_COMPACT 11 2595 VID 0ms SET 12 FAIL INVALID
- The first action is "SET RECORD". The action was successful, and took 1440ms to complete. After it completed, the mode was VIDEO_STD, which has a CHDK mode number 9 and canon mode number 2593. As indicated by VID, CHDK recognized this as a video mode.
- The second action was a successful attempt to set the mode to VIDEO_COMPACT
- The third action was an unsuccessful attempt to set the mode to VIDEO_MY_COLORS. It failed because the mode was invalid, i.e. does not exist in the cameras modemap.
The second script menu option, batch type applies only to this mode. It is ignored in all other modes.
- 0 test only modes that are valid in the current mode map.
- 1 attempt to set all CHDK modes. NOTE: This is only useful for testing the script and the C API error reporting.
This mode allows setting any valid mode through an interactive menu Console displays list of the names of all valid modes. Up and down scroll through the list, set tries to set the mode. After a mode is set, the script displays the current status and waits up to 10 sec for a key press Menu quits the script
This roughly behaves like setmode.bas, setting the mode specified in the script options
Single test mode is controlled by two options. These options are ignored in all other modes.
Single test type The third script menu option chooses whether this mode uses canon or CHDK mode numbers.
- 0 The test will be performed using the set_capture_mode_canon function, and the test value will be interpreted as a PROPCASE_SHOOTING_MODE value.
- 1 The test will be performed using set_capture_mode and the test value will be interpreted as a CHDK mode number.
Single test value This is the mode to set, as specified above.
- This script requires the capmode module.
- Ixus40/SD300 Missing required function