CHDK Wiki
Register
Line 72: Line 72:
 
[http://www.zshare.net/download/631205658df349/ Firmware G9 1.00D] (from 0xFF810000 created by Titan_G9)
 
[http://www.zshare.net/download/631205658df349/ Firmware G9 1.00D] (from 0xFF810000 created by Titan_G9)
   
[http://www.zshare.net/download/101256473bc88260/ Firmware G9 1.00F] (Dumped by bingo_bongo)
+
<s>[http://www.zshare.net/download/101256473bc88260/ Firmware G9 1.00F] (Dumped by bingo_bongo)</s> Not correct!
   
 
Please place other G9 firmware versions to here.
 
Please place other G9 firmware versions to here.

Revision as of 16:25, 16 April 2008

Firmware info

As in other Canon PS case, the ver.req file works as well in this model. Press FUNCSET and DISP simultaneously: It shows the following:

Canon PowerShot G9
P-ID:315A  PAL D

Firmware Ver GM1.00D
NoError
Jul 23 2007    08:05:13

subsequent press of DISP (while still holding FUNCSET) reveals:

Adj Ver.008.005
IS Firm Ver.  3.00
IS Param Ver.  2.03

If you use vers.req instead of ver.req at the last screen you can see more info:

Total Shoot  : 26    <=- variating
Open Shutter :  0
Close Shutter:  0

If you power on in PLAY mode without ver.req on the SD card and press the FUNCSET and DISP buttons simultaneously, the screen shows:

Firmware Ver. 1.0.0.0

    [ OK ]


Firmware Update Menu Item

Create a file called PS.FI2 on the root of the SD card, power the G9 on in Play mode, and press the menu button.

The menu now shows an extra option:

Firm Update...

LED memory addresses

LED_PWR   0xC0220068
LED_BLUE  0xC022006C
LED_AF    0xC0220094 (Same as G7)
LED_ISO   0xC02200B0

LED scan results: between 0xC0220060 and 0xC02200FF

Led turned ON and OFF in the following order and time:

 7 sec Power LED
 8 sec Blue LED
36 sec AF LED
53 sec ISO LED 

How to dump the G9 firmware

To run the blinker you must have bootable SD card with diskboot.bin AF beam Blue led ISO Led

Step by step instructions for dump

Available firmware dump

Firmware G9 1.00D (from 0xFF810000 created by Titan_G9)

Firmware G9 1.00F (Dumped by bingo_bongo) Not correct!

Please place other G9 firmware versions to here.

Current status