mNo edit summary |
|||
| Line 32: | Line 32: | ||
===LED memory addresses:=== |
===LED memory addresses:=== |
||
| − | To run the [http://grandag.nm.ru/hdk/blinker/ blinker] you must have '''[[bootable SD card]]''' with ''' |
+ | To run the [http://grandag.nm.ru/hdk/blinker/ blinker] you must have '''[[bootable SD card]]''' with '''bootdisk.bin''' |
[http://www.zshare.net/download/6081507b9fddc7/ AF beam] |
[http://www.zshare.net/download/6081507b9fddc7/ AF beam] |
||
[http://www.zshare.net/download/6081591cd5594d/ Blue led] |
[http://www.zshare.net/download/6081591cd5594d/ Blue led] |
||
Revision as of 15:25, 2 January 2008
Firmware info
As in other Canon PS case, the ver.req file works as well in this model. Press FUNCSET and DISP simultaneously: It shows the following:
Canon PowerShot G9 P-ID:315A PAL D Firmware Ver GM1.00D NoError Jul 23 2007 08:05:13
subsequent press of DISP (while still holding FUNCSET) reveals:
Adj Ver.008.005 IS Firm Ver. 3.00 IS Param Ver. 2.03
If you use vers.req instead of ver.req at the last screen you can see more info:
Total Shoot : 26 <=- variating Open Shutter : 0 Close Shutter: 0
If you power on in PLAY mode without ver.req on the SD card and press the FUNCSET and DISP buttons simultaneously, the screen shows:
Firmware Ver. 1.0.0.0
[ OK ]
LED memory addresses:
To run the blinker you must have bootable SD card with bootdisk.bin AF beam Blue led ISO Led
LED_PWR 0xC0220068 LED_BLUE 0xC022006C LED_AF 0xC0220094 (Same as G7) LED_ISO 0xC02200B0 LED scan results: between 0xC0220060 and 0xC02200FF Led turned ON and OFF in the following order and time: 7 sec Power LED 8 sec Blue LED 36 sec AF LED 53 sec ISO LED
Work in progress to find the missing LEDs correct addresses and to dump the fimware :-) Current status