Ad blocker interference detected!
Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers
Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.
HELP PLEASE! I have been trying to load CHDK f/w in my Cannon PowerShot S3is because I want to use the raw format. My camera accknowledges it is there, but only the battery moniter comes up when I load the fw. I know I have the right hacks and I am certain it is something simple, but I just can't get it. I would appriciate any help in this matter. Thank you Diane
- If you can see the battery indicator then CHDK is loaded and running. Read the Firmware Usage page. You need to only enter the <ALT> mode by pressing the default button that toggles it on and off to get to all your CHDK options and menus. (The default <ALT> toggle button is the Shortcut button, you may change this from within CHDK's configuration options. This has been clearly explained on the firmware usage and FAQ pages.). Read the FAQ too for a quick list to all the shortcut buttons that enables you to toggle RAW on and off as you need it.