Canon P&S cameras are limited to a 4G file size when saving video files on a FAT formatted SD card. Listed below are three scripts that will automatically restart the video recording process periodically to overcome this issue.
Script 1
The first script is a simple uBASIC script that can be used to periodically restart video recording to get around this 4G file size limit. It repeatedly creates a new video file after a user defined interval, allowing recording until the SD card fills with only a brief gap between each video file. Save it to your SD card with a .bas extension (ex: video.bas).
(script 1a is for camera that do not have a video button)
@title MultiMovie 1a @param x minutes per file @default x 10 press "shoot_half" sleep 2000 release "shoot_half" :loop print "segment started..." click "shoot_full" s=get_tick_count do sleep 500 until x<=((get_tick_count-s)/60000 ) click "shoot_full" do sleep 100 until get_movie_status=1 goto "loop" end
.
(script 1b is for camera with a seperate video button)
@title MultiMovie 1b @param x minutes per file @default x 10 press "shoot_half" sleep 2000 release "shoot_half" :loop print "segment started..." press "video" sleep 2000 release "video" s=get_tick_count do sleep 500 until x<=((get_tick_count-s)/60000 ) press "video" sleep 2000 release "video" do sleep 100 until get_movie_status<2 sleep 1000 goto "loop" end
Script 2
The second script is a slightly fancier version of the first script, with improved status messages, the ability to index to a new file by pressing the "SET" button and the ability to disable the backlight by pressing the "DISP" button. Note : when the LCD backlight is off, there is code to blink one of the camera LED's to indicate that the script is still running. You may have to change the LED number from 4 to something else for your camera in two places where it say set_led 4 0
@title MultiMovie 2 @param x minutes per file @default x 15 f=0 print "recording started..." press "shoot_half" sleep 1500 b=1 l=0 :new f=f+1 click "shoot_full" if f=1 then release "shoot_half" print "starting file :";f e=get_tick_count+(x*60000) p=get_tick_count+1000 if b=0 then set_backlight 0 :loop if is_pressed "set" then goto "reload" if is_pressed "display" then if b=0 then b=1 set_backlight 1 sleep 1000 else b=0 set_backlight 0 sleep 1000 endif endif t=get_tick_count if t > e then goto "reload" if t < p then goto "loop" p=get_tick_count+1000 m=(e-t)/60000 s=((e-t)%60000)/1000 cls print "file:";f,"time left:";m;"m ";s;"s" if b=0 then if l=0 then set_led 4 0 l=4 else l=l-1 if l=0 then set_led 4 1 endif endif endif goto "loop" :reload print "reloading..." click "shoot_full" do sleep 100 until get_movie_status=1 goto "new" :restore if b=0 then set_backlight 1 if get_movie_status=4 then click "shoot_full" print "recording halted" end
Modified from a script written by outslider and posted on the CHDK forum by Vash11779
.
Script 3
Listed below is a more sophisticated script written in Lua by msl.
This script allows you to turn the backlight on & off by pressing the DISP button, halt the script by pressing the MENU button and restart recording by pressing the SET button. It works on cameras with and without a dedicated video button.
Save it to your SD card with a .lua extension (e.g. vid_ext.lua). Note : CHDK 1.1 or newer is required to run this script.
--[[ ******************************** Licence: GPL (c) msl 2012/04/25 ******************************** @title ExtendedVideo @param a Auto (re)start [1] @default a 1 @param b Time in s 0=max @default b 0 ]] function StartStopVideo() local rec, vid = get_mode() local vid_button = get_video_button() -- get_video_button() available changeset 1829 if rec == true and vid == true and vid_button == 0 then press("shoot_full") sleep(300) release("shoot_full") elseif rec == true and vid_button == 1 then click("video") end end function restore() if get_movie_status() == 4 then StartStopVideo() end cls() set_console_layout(0,0,25,5) set_console_autoredraw(1) end if a<0 or a>1 then a=0 end if b<0 then b=0 end restart = a record_time = b BL=0 TC=false time_start = 0 time_now = 0 set_console_layout(9,1,39,6) if restart==1 then cls() print("Automatic Video (Re)Start") if record_time > 0 then print("record time:", record_time, "s") end sleep(2000) end set_console_autoredraw(0) while true do if TC == false and record_time > 0 then time_start = get_tick_count() TC = true end cls() if restart ~= 1 then print("[SET] Start/Stop Video") end print("[DISP] On/Off Backlight") print("[MENU] End") console_redraw() wait_click(900) if is_pressed("display") then set_backlight(BL) if BL == 1 then BL=0 else BL=1 end end if is_pressed("set") and restart ~= 1 then StartStopVideo() end if is_pressed("menu") then restore() break end if TC == true and record_time > 0 then if get_tick_count() - time_start >= record_time * 1000 + 2000 then StartStopVideo() -- stop video TC = false end end status = get_movie_status() if (status < 4 or status > 4) and restart == 1 then StartStopVideo() cls() print("Start recording") console_redraw() sleep(5000) if BL == 1 then set_backlight(0) end end end
Based on discussion in this forum thread : sx230, unlimited video, 4GB file limit