This page is intended to collect information about permanent (persisting after CHDK is removed) camera failures which are either suspected or proven to be caused by the use of CHDK. If a camera damaging bug does appear in CHDK, it is likely that it will take multiple occurrences to confirm that it is a caused by CHDK and not a coincidental malfunction. This is especially true if the problem involves reducing the life of a component rather than an instant failure. Having a central location should help identify any pattern that exists, and help users identify similar failures as part of a possible pattern.
The developers of CHDK believe that CHDK is unlikely to cause permanent damage to cameras. However, CHDK comes with absolutely no warranty, and users must accept that destruction of their camera is a possible result of using CHDK. See the FAQ for more information.
Actual reports should be made on the forum, preferably in the development thread for the specific camera. These reports should contain as much detail as possible, including the model, canon firmware version, CHDK build, and the details of the malfunction and when it occurred. A link to the thread with a brief summary should be added to this page.
This page should not be used for discussion. Use the forum, or if for some reason that is impossible, the discussion page.
There are currently no confirmed instances of CHDK causing permanent damage.
- After I started using CHDK some messages like LENS ERROR start appearing... =(
- developer note: User did not provide any specifics. As described above, the specific circumstances of the error should be described in a forum post. Without any details, the report is useless.
- http://chdk.setepontos.com/index.php?topic=4284.msg75118#msg75118 lens error with lens extended after update from 0.9.9 to 1.1.0. camera non-functional.
- http://chdk.setepontos.com/index.php?topic=5691.msg62825#msg62825 camera non-functional with "lens error" after camera crashes with lens extended.
- Another possible case http://chdk.setepontos.com/index.php?topic=5691.msg68658#msg68658 -
- See also http://chdk.clan.su/forum/22-608-10521-16-1297881215 (russian)
- http://chdk.setepontos.com/index.php?topic=10559.0 E32 error after loading incorrect CHDK build ixus110_sd960-100b-1.2.0-3031-full_BETA.zip on a 101f camera.
Lens failure after using subject distance override.User found mechanical cause of the failure.
A mechanism by which CHDK causes damage has been positively identified, or other evidence has established beyond reasonable doubt that CHDK causes some specific error.
A reported of a camera malfunction in association with CHDK, without other obvious causes.
Readers should be aware that
- Humans tend to assume there is a causal relationship when events happen close together, even if there is none.
- If a camera damaging bug exists, it will most likely affect many users of the camera, so a single occurrence on a widely used port is likely to be coincidental.
- A failure that reduced the service life of some component would be very difficult to confirm.
A reported failure for which other causes were conclusively found, e.g. a hardware failure. Collecting these may help others who experience the same problem.