CHDK Wiki
(link to EOSCard)
No edit summary
Tag: rte-source
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
Initially Created -- (May 15, 2012)
 
Initially Created -- (May 15, 2012)
   
  +
{{notice|Much of the information on this page is old & obsolete. The use of the [http://zenoshrdlu.com/stick/stick.html STICK] utility to configure CHDK for your SD card is recommended over the method described on this page.}}
 
   
   
Line 217: Line 217:
   
 
[[File:Winterly_Sunrise_in_Garden.jpg|thumb|left|chdk photo]]
 
[[File:Winterly_Sunrise_in_Garden.jpg|thumb|left|chdk photo]]
  +
[[Category:Help]]

Latest revision as of 22:21, 27 May 2015

Initially Created -- (May 15, 2012)

Notice

Much of the information on this page is old & obsolete. The use of the STICK utility to configure CHDK for your SD card is recommended over the method described on this page.


This guide was based off the canon powershot s100.

It might work for other cameras but,

if it does not work for your camera visit

Prepare your SD card for more help and info.



Step 1

Download and run camera version 1.3 to get camera version.
http://chdk.setepontos.com/index.php?topic=4743.0
(ACID is good too by the way....I have both )

Untitled

Camera Version 1.3


CameraVersion1.3


Untitled2

ACID




ACID

This one hangs for a bit sometimes

when you try to use it





Step 2

Browse your computer and then Open a picture taken with your

camera with the program to get your camera version number.


Step 3

Locate and download correct CHDK version from:
http://www.mighty-hoernsche.de/trunk/


Untitled4

S100 trunk









Step 4

Unzip the files on your computer.

Sd reader small

SD card reader

'For the next' few

'steps you need' an

SD card reader




step 5

make your sd card bootable
(I used EOScard 1.2, can be found here http://pel.hu/getpage.php?ac=2 or here http://pel.hu/down/)

(Press refresh, click on chdk, then hit save, and your done)

Untitled3

EOScard 1.2








Step 6

Place CHDK files on the root of the SD card.

Untitled5

SD card root







Step 7

Lock the card by sliding the small switch and place the SD card in the camera.

Lock small small

SD card Lock switch








Step 8

A.

To start CHDK in play mode:

Press and hold the play button until the CHDK logo appears.

  • while in play mode half press shutter takes you to shooting mode.

B.

To start CHDK in Shooting mode (does not work on all cameras):

Press and hold on/off button until the CHDK logo appears.

  • while in shooting mode press and hold the play button to go to play mode
20120515 220935

CHDK LOGO









Step 9

ENJOY !!!!!!!!!!!!!!

these were not taken with s100

they were taken using CHDK though

Droplets Experiment with Canon S5 IS in RAW mode

chdk photo







Winterly Sunrise in Garden

chdk photo