Wikia

CHDK Wiki

A550

Talk2
565pages on
this wiki
Revision as of 20:49, February 2, 2011 by 99.157.74.147 (Talk)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

PowerShot A550 Edit

Notice

CHDK is available for the Powershot A550 with firmware version 1.00C from the Download page



Reviews and Specifications Edit

Technical Data Edit

  • Digic II image processor
  • VxWorks operating system
  • Sensor: 7.1 MP, 1/2.5 inch CCD type
  • Lens: 5.8 - 23.2 mm (35mm film equivalent: 35 - 140mm), F/2.6 - F/5.5, 4x optical zoom
  • Display: 2.0 inch LCD, approx. 86,000 pixels
  • Storage: SD / SDHC / MMC
  • Power: AA size batteries
  • Dimensions: 3.59 x 2.52 x 1.70 inch (91.2 x 64.0 x 43.1 mm), Weight: 160g (5.64 oz.)

Version info Edit

The trick with the ver.req file works on the A550 as well, with the following result:

Canon PowerShot A550
P-ID:3150 PAL V
firmware ver GM1.00C
No error
Dec 4 2006 07:46:45


For Developers Edit

  • Porting the A550 is completed, the port is in the 'official' source tree !

Memory map Edit

Tested on A550 with blink G7 firmware dump.

LEDs Edit

0xc0220080: AF beam:           (0x46 ON - 0x44 OFF) 
0xc0220084: blue print:        (0x46 ON - 0x44 OFF)
0xc0220088: viewfinder orange: (0x46 ON - 0x44 OFF)

Blinker Firmware compilation Edit

Serial port download solution is the choice for dump firmware.
Blink G7 source code (main.c) must be modified in according with led memory map

long* led=(long*)0xc0220080;

The blink G7 firmware was compiled using cygwin in the pack 'ready-to-use' environment downloadable here.
Before compile must be edit the last row of the make.bat.

pakwif PS.FIR main 0x3150

where 0x3150 is the P-ID viewed with ver.req trick.

Firmware dumps Edit

I have made dump from 0xFFC00000 to 0xFFFFFFFF adress!

NOTE: mhhhh...I see that not any others firmware is 4 Mbyte...to think and to think... EUREKA!!! :)

Raw Firmware Dump is 4 Mbyte as 0x3FFFFF...dumped with photo-transistor.

If you do:

[0xFFEEB4D0 (data_src) + 0xB540 (data_len) - 0xFFC00000 (start firmware address)]

the result is the real firmware lenght!

0x2F6A10 - in my case

Well, I had trimmed remaining part of the file...and this is the result: Firmware A550 100c

Saveas64

Download location for firmware dumps:
P&S firmware dumps mirror

Porting the CHDK (outdated)Edit

First of all download svn clien and then execute:

Using A560 source as the base code (platform and loader).

  • Modify folder structure: change folders names of platform\a560\sub\100a in platform\a550\sub\100c and loader\a560 in loader\a550
  • Copy the PRIMARY.BIN in platform\a550\sub\100c (dump of the camera)
  • Modify file core\rav.h:
#elif defined (CAMERA_a620) || defined (CAMERA_a710) || defined (CAMERA_a550) || defined (CAMERA_a560)...  
#define ROWPIX 3152   // for 7 MP
#define ROWS   2340   // for 7 MP
  • Add the new camera to the Makefile.Inc (root folder)
PLATFORM=a550
PLATFORMSUB=100c
  • Modify Makefile.Inc --> in platform\a550\sub\100c
#0x3150
PLATFORMID=12624
  • Modify boot.c

Start from function kernelinit found with IDA and called it in h_usrKernelInit. Walk back (through XREF) in IDA until function boot...

calls flow:

boot()-->h_usrInit()-->h_usrKernelInit()-->usrRoot()-->etc...(but not interest us)
                                       |-->kernelinit()

Rename the fuction call with your address:

ex. excVecInit => sub_FFCB6DB8

this is the final result:

void boot()
{
   long *canon_data_src = (void*)0xFFEEB4D0;
   long *canon_data_dst = (void*)0x1900;
   long canon_data_len = 0xB540;
   long *canon_bss_start = (void*)0xCE40; // just after data
   long canon_bss_len = 0x9F2B0 - 0xCE40;
   long i;
 [...]
}
void h_usrInit()
{
   asm volatile (
     "STR     LR, [SP,#-4]!\n"
     "BL      sub_FFC01968\n"
     "MOV     R0, #2\n"
     "MOV     R1, R0\n"
     "BL      sub_FFCC1CEC\n"      //unknown_libname_201
     "BL      sub_FFCB6DB8\n"      //excVecInit
     "BL      sub_FFC011C4\n"
     "BL      sub_FFC01728\n"
     "LDR     LR, [SP],#4\n"
     "B       h_usrKernelInit\n"
   );
}
void  h_usrKernelInit()
{
   asm volatile (
     "STMFD   SP!, {R4,LR}\n"
     "SUB     SP, SP, #8\n"
     "BL      sub_FFCC21EC\n"      //classLibInit
     "BL      sub_FFCD2318\n"      //taskLibInit
     "LDR     R3, =0x4E60\n"
     "LDR     R2, =0x9C4C0\n"
     "LDR     R1, [R3]\n"
     "LDR     R0, =0x9D010\n"
     "MOV     R3, #0x100\n"
     "BL      sub_FFCCDF08\n"      //qInit
     "LDR     R3, =0x4E20\n"
     "LDR     R0, =0x51C0\n"
     "LDR     R1, [R3]\n"
     "BL      sub_FFCCDF08\n"      //qInit
     "LDR     R3, =0x4EDC\n"
     "LDR     R0, =0x9CFE4\n"
     "LDR     R1, [R3]\n"
     "BL      sub_FFCCDF08\n"      //qInit
     "BL      sub_FFCD66D4\n"      //workQInit
     "BL      sub_FFC012B0\n"
     "MOV     R4, #0\n"
     "MOV     R3, R0\n"
     "MOV     R12, #0x800\n"
     "LDR     R0, =h_usrRoot\n"
     "MOV     R1, #0x4000\n"
     "LDR     R2, =0xCF2B0\n"   // 0x9F2B0 + 0x30000
     "STR     R12, [SP]\n"
     "STR     R4, [SP,#4]\n"
     "BL      sub_FFCCF558\n" //kernelInit
     "ADD     SP, SP, #8\n"
     "LDMFD   SP!, {R4,PC}\n"
   );
}
[...]
void  h_usrRoot()
{
   asm volatile (
     "STMFD   SP!, {R4,R5,LR}\n"
     "MOV     R5, R0\n"
     "MOV     R4, R1\n"
     "BL      sub_FFC019D0\n"
     "MOV     R1, R4\n"
     "MOV     R0, R5\n"
     "BL      sub_FFCC6CA4\n"      //memInit
     "MOV     R1, R4\n"
     "MOV     R0, R5\n"
     "BL      sub_FFCC771C\n"      //memPartLibInit
     //"BL      sub_FFC017E8\n"      //nullsub_1
     "BL      sub_FFC01704\n"
     "BL      sub_FFC01A0C\n"
     "BL      sub_FFC019F0\n"
     "BL      sub_FFC01A38\n"
     "BL      sub_FFC019C4\n"
   );
[...]
   asm volatile (
     "LDMFD   SP!, {R4,R5,LR}\n"
     "B       sub_FFC0136C\n"      //IsEmptyWriteCache_2
   );
}
  • Finish Makefile.Inc --> in platform\a550\sub\100c
MEMBASEADDR=0x1900
RESTARTSTART=0x50000
MEMISOSTART=0x9F2B0 // find in original h_usrKernelInit()  
MEMISOSIZE=0x30000
ROMBASEADDR=0xffc00000

I know how to find the missing fuction in lib.c and stubs_entry_2.S.
It's enought compare a precedent CHDK porting near and similar our cam.
Find in IDA (key G) address function read in source.
And with many patience (...and lucky) find in our firmware similar function, using IDA text search, hierarchic call function or some trick (ex. often after o before the missing function there are string/DCD istance)

Chaotic process, sorry :)

note: some function discover with automatic procedure are wrong...well, you must check all function in stubs_entry.S, and if you find error it's enough reinstance it in stubs_entry_2.S.

Download my source if you are interesting to commented source of: stubs_entry_2.S, lib.c and stubs_min.S.

Guide should be continued (Working in progress):

  • modify/create capt_seq.c (needed for boot chdk)
  • modify/create movie_rec.c
  • verify keyboard map/ property case/etc..
  • add some #if defined(CAMERA_XXX) around the source (out the platform folder)
  • and if you are lucky man and I haven't forgot anything...this is the time for test and correct bugs!

Release (outdated) Edit

The time is come!!

IT'S VERY IMPORTANT YOUR UTILIZATION REPORT FOR FIND BUGS, PROBLEM AND STRANGE BEHAVIORS!
POST HERE AND IN FORUM ALL YOUR COMMENT, THANK!

ATTENTION: The porting is added to the official trunk!! :)
Get next release from your favourite build!

...now enjoy with your new chdk features: CHDK for a550 - 0.20MB - 12 / March / 2008

...and if you want help: Full CHDK Source trunk 322 with a550 - 0.97MB - 12 / March / 2008

Stay tuned!

Bug Reports (outdated) Edit

Write here all your comment, bug, problem and strange behaviors:

  • It's needed find factory value for tables: shutter_speeds, aperture_size and Focallenght (see below).
  • Motion Detection don't work.
  • Zebra mode stripes are shifted to the right (not properly aligned) and the edge is cut off and looped to the other side of the screen.
  • Dof calculator ...i always get S/R1/R2: inf/inf/inf
  • Add: Mode Screen Rotated / Flashlight LCD (enable it's in misc, rotate 270 in alt mode)
  • Add Support: USB Remote Button

(strike text is solved)

Would you help? (outdated)Edit

I have need some help !

There are some problem in bracketing...It's needed find factory value for:

  • fl_tbl (Focallenght): from EXIF for each zoom step (The 'Canon distance number' can also be found in the EXIF data (Look for FocusDistanceUpper (...or Focallenght) if using Phil Harvey's Exif tool))
  • aperture_size_table: from EXIF and ProperyCase browser (#23 or #26) at different apertures
  • shutter_speeds_table: from EXIF and ProperyCase browser (#264 or #262) at different shutter speeds (nearly the same for different cameras)

thanks to ewavr and Porting the ixus70_sd1000 ver 102a to CHDK Post

Post your result on FORUM! thanks

p.s. for see property case ALT->menu->debug->Show PropCases and set prop Case page for what you want see (ex. pag. 26 for propcases 262, 264)

thanks men!

Important Notes Edit

  • first of all: sorry for my english...I'm illiterate Italian man :) (if you don't find my CHDK port error...you can enjoy to correct my english grammar error)
  • porting is out: porting now run...I hope to find time for complete my wiki page with full porting process.
  • special regards: to Rossig for all support, the only man that help ...and bear with me, thanks a lot!
  • thanks: to my Babylon Translator...If you don't understand what i write, now you know!

Around Wikia's network

Random Wiki