Canon Powershot A2200 IS
The Powershot A2200 is NOT ported yet, although it is being ported. See the forum link below. |
Reviews and Specifications
Technical Data
- Digic IV image processor
- DryOS operating system
- Sensor: 14.1 million effective pixels, 1/2.3" CCD (6.17 x 4.55 mm)
- Max image size: 4320 x 3240
- 4x optical zoom lens 28-112mm (35mm equiv), F2.8 - F5.9, Image stabilization
- 2.7 inch LCD
- ISO 80-1600
- Movie Recording: 1280 x 720 (30 fps), 640 x 480 (30 fps), 320 x 240 (30 fps)
- Power: lithium-ion battery
- Weight: 135g (4.76 oz), (without batteries): 115 g (4.06 oz)
- Dimensions: 93.2 x 57.2 x 23.6mm (3.67 x 2.25 x 0.93 in)
Firmware info
The ver.req file method is used to gather firmware information about this camera model.
Note: Camera must not be set in Easy mode, or this method won't work.
Version 1.00B
ver.req First Page Data: After holding down FUNCSET then pressing DISP once:
Canon PowerShot A2200 P-ID:322A PAL D Firmware Ver GM1.00B(1.0.0.0) Adj Ver.005.005 Serial No. XXXXXXXXXXXX
ver.req Second Page Data: After holding down FUNCSET then pressing DISP twice:
Canon PowerShot A2200 P-ID:322A PAL D Build Dec 6 2010 14:31:05 NoError
Note: Using vers.req file instead, we get two additional screens.
vers.req Third Page Data: After holding down FUNCSET then pressing DISP three times:
Canon PowerShot A2200 P-ID:322A PAL D Total Shot: 11 Zoom Retry Count: 0 Mecha Condition: 0x00000000
vers.req Fourth Page Data: After holding down FUNCSET then pressing DISP four times:
Canon PowerShot A2200 P-ID:322A PAL D Driver Info: 0x00000000
CHDK Specialties
This section describes special CHDK-related things...
For Developers
General info:
- DryOS v2.3, release #0047
- FW start address: 0xFF810000
LED addresses
0xC0220130 Rear AC (green) 0xC02200AC Front AF (orange)
Available firmware dumps
- Firmware dump for 1.00B [1]
Porting process & links
- Porting Thread: http://chdk.setepontos.com/index.php?topic=6254.0