CHDK Wiki
Register
No edit summary
(41 intermediate revisions by 23 users not shown)
Line 1: Line 1:
  +
{{Warning|CHDK is not available for this camera. There is different hack (not CHDK!) available but please read the entire [http://chdk.setepontos.com/index.php/topic,4202.0.html development thread] before you try it. More than one user has had problems which they were not able to recover. Many, but not all of these were caused by not having Firmware 1.0.3 on the camera before performing the modification. It is your responsibility to understand the risks before you proceed.
Instructions from homeshopmachinist [http://bbs.homeshopmachinist.net/showthread.php?t=37569]
 
  +
I'm linking to the files he's hosting but you should probably check the dev[http://chdk.setepontos.com/index.php/topic,4202.msg40072.html#msg40072] thread to see if there are more recent versions.
 
  +
'''SERIOUSLY YOU COULD DESTROY YOUR CAMERA IGNORE THIS AT YOUR OWN RISK'''
Following are the instructions to perfrom the upgrade:
 
  +
}}
  +
The Canon '''Rebel Digital XT''' (North America) / '''EOS Kiss n Digital''' (Japan) / '''EOS 350D''' (Elsewhere) is the successor of the EOS 300D.
  +
  +
{|align="right" style="border-collapse:collapse; font-size: x-small;"
  +
|__TOC__
  +
|}
  +
[[Image:EOS_350D_all.jpg|thumb|250px|EOS 350D All Color Options]]
  +
[[Image:EOS_350D_front.jpg|thumb|250px|EOS 350D Front]]
  +
[[Image:EOS_350D_back.jpg|thumb|250px|EOS 350D Back]]
  +
  +
==Reviews==
  +
* [http://www.dpreview.com/reviews/canoneos350d/ DPReview]
  +
* [http://www.cameralabs.com/reviews/Canon350D/ CameraLabs]
  +
* [http://www.digitalcamerareview.com/default.asp?newsID=2467 DigitalCameraReview.com]
  +
* [http://www.imaging-resource.com/PRODS/EXT/EXTA.HTM Imaging resource]
  +
  +
==Technical data==
  +
'''→''' Camera specifications: [http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=139&modelid=11154#ModelTechSpecsAct 350D@Canon USA]
  +
  +
* Sensor: 8.0 million effective pixels, 22.2 x 14.8 mm CMOS type
  +
* '''DigiC II''' image processor, based on ARM946E-S core (32 bits RISC CPU)
  +
* '''VxWorks 5.5''' real-time embedded operating system, from Wind River Inc.
  +
* Display: 1.8" TFT, 115,000 pixels
  +
* Optical pentamirror viewfinder
  +
* Storage: Compact Flash Type I or II and Microdrive
  +
* Battery: Canon Li-ion Battery NB-2LH
  +
* Dimensions: 27 x 94 x 64 mm, Weight: 490g without battery, lens, and CF
  +
* Speed: Approx 3.0 fps continous shooting up to 14 JPEG / 4 RAW frames
  +
  +
==Instructions==
  +
{{Warning|Read the entire [http://chdk.setepontos.com/index.php/topic,4202.0.html development thread] before you try this. More than one user has had problems which they were not able to recover. Many, but not all of these were caused by not having Firmware 1.0.3 on the camera before performing the modification. It is your responsibility to understand the risks before you proceed.}}
  +
  +
By homeshopmachinist [http://bbs.homeshopmachinist.net/showthread.php?t=37569]
  +
  +
I'm linking to some files he's hosting but you should probably check the dev[http://chdk.setepontos.com/index.php/topic,4202.msg40072.html#msg40072] thread as there are more recent versions, or check [http://www.mediafire.com/?sharekey=78ee45b97520ae1308f8df73f2072ed62590fcdbf5f0ba1af7e866bfb1230ce0 this mediafire share] if the old links break.
  +
  +
 
----
 
----
Make sure battery is FULLY CHARGED. Camera must be firmware ver 1.0.3
+
'''Make sure battery is FULLY CHARGED.'''
  +
  +
=='''Camera MUST be firmware ver 1.0.3!'''==
  +
Before you begin, check your camera's firmware version by pressing menu and pressing the right arrow button to get to the last section on the top line of the menu. If the firmware version is not 1.0.3, go to this page and follow the instructions there. -> http://web.canon.jp/imaging/eosdigital2/e3kr2_firmware-e.html
  +
  +
Otherwise if you are already running firmware version 1.0.3, proceed to step one below.
  +
  +
Note: A later version of the original scanled.fir file referred to in step one may be safer and less likely to result in a bricked camera. That file is bootflg2.fir. [http://chdk.setepontos.com/index.php?action=dlattach;topic=4202.0;attach=4318] It was posted in reply #342 in the 350D thread. The discussion leading to the development of this later version began in reply #329. [http://chdk.setepontos.com/index.php?topic=4202.msg57156#msg57156] Please carefully review the ReadMe.txt file included with the bootflg2 file.
   
 
1. Format your CF card. Copy scanled.fir [http://ixian.ca/server/scanled.fir] to the card.
 
1. Format your CF card. Copy scanled.fir [http://ixian.ca/server/scanled.fir] to the card.
Line 11: Line 55:
 
3. Turn off camera and take battery out and back in. Leave it off.
 
3. Turn off camera and take battery out and back in. Leave it off.
   
4. Insert CF card in card reader. Run Cardtricks[http://chdk.setepontos.com/index.php?action=dlattach;topic=4202.0;attach=3585] and select the CF card by clicking on the picture of a memory card. Format the card in Cardtricks using the format button.
+
4. Insert CF card in card reader. If your card is bigger than 4GB, go to step 6! Cardtricks can't handle FAT32, which is required to use bigger cards. Run [[Cardtricks]] and select the CF card by clicking on the picture of a memory card. Format the card in Cardtricks using the format button. (if you are using a Macintosh, format the card in the camera and use [http://www.zenoshrdlu.com/macboot/macboot.html MacBoot] in the following step to make the card bootable)
   
5. Using Cardtricks make the CF bootable. Check "CF boot sector" at the bottom right of the Cardtricks screen and then click "make bootable." Cardtricks will tell you to switch on the 'write protect switch' CF cards do not have this, don't worry about it.
+
5. Check "CF boot sector" at the bottom right of the [[Cardtricks]] screen and then click "make bootable." Cardtricks will tell you to switch on the 'write protect switch'. CF cards do not have this, so don't worry about it. (Mac users can use [http://www.zenoshrdlu.com/macboot/macboot.html MacBoot] to accomplish this step.)
   
  +
6. for cards bigger than 4GB, or if you simply want to have FAT32 instead of FAT16, don't use Card tricks. Check out the guide on making bootable FAT32 cards [http://chdk.setepontos.com/index.php?topic=4202.msg91030#msg91030 HERE]. It's written for windows users, but you should be able to figure this out with other operating systems if you are a bit of a computer person.
6. Copy the files in 350d_iso3200_spot [http://ixian.ca/server/350d_iso3200_spot.zip] directory to the CF card.
 
   
  +
7. Copy the autoexec.bin in 350D-20101011.zip [http://www.mediafire.com/file/uiw46q26dq9ddmm/350D-20101011.zip] or one of the other autoexec.bin files published in the development forum thread into the root directory to the CF card, i.e. X:\autoexec.bin - not into any subdirectory.
7. Insert CF in the camera. If the camera is booting from the card the Blue LED will flash.
 
   
  +
8. Insert CF in the camera. If the camera is booting from the card the Blue LED will flash.
To use the ISO 3200 function press INFO and you can change ISO levels from there by pressing the ISO arrow key. For spot metering press Menu and the <strike>DP</strike>'''AE-Lock''' button with the blue LED.
 
   
  +
9. '''REMEMBER:''' After performing these steps, the camera will work normally with normal non-bootable CF cards. With a bootable card It will automatically boot the hack from an autoexec.bin file. It will however not work at all with bootable cards that don't contain a functioning autoexec.bin!
Blue led will blink and there will be a sound. Spot metering will be enabled.
 
   
  +
The only change to the camera is done in the above step 2. all the other steps only change your CF card and are erased by formatting it. This change to the camera from step 2 is reversible. For info on this check out the forum discussion.
----
 
I don't know what the etiquette is here so below are older posts, if someone wants to clean this up more feel free.
 
----
 
   
Great news!
 
   
  +
<u>Please note that after step 4 above :</u>
Some guy called '''maiohwmai''' on chdk forum managed to enable ISO H/3200
 
   
  +
When the camera is powered on, it will behave as follows:<br />- Without a card in: Warning message "No CF card" will be displayed on LCD screen..<br />- Without a bootable card: No message displayed on LCD screen (default behavior of camera).<br />- With a bootable card in and a correct AUTOEXEC.BIN file in the root directory of the card, the camera will execute the AUTOEXEC.BIN file, no message displayed on LCD screen..<br />- With a bootable card in that does not contain an AUTOEXEC.BIN, or contains a bad AUTOEXEC.BIN file, the camera will turn on and show a message on the LCD screen about the lack of an AUTOEXEC.BIN file.
link to forum thread: [[http://chdk.setepontos.com/index.php/topic,4202.msg40072.html#msg40072|http://chdk.setepontos.com/index.php/topic,4202.msg40072.html]]
 
   
  +
==Instuctions on using the additional functions==
   
  +
All features are accessed through the info button:
   
  +
{| border="0" cellpadding="0" cellspacing="0" class="MsoNormalTable" style="margin: auto auto auto 2.8pt; width: 531.7pt; border-collapse: collapse; mso-padding-alt: 0cm 3.5pt 0cm 3.5pt" width="761"
From lazy ones - from the thread:
 
  +
|- style="height: 15.4pt; mso-yfti-irow: 0; mso-yfti-firstrow: yes"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN">„1:ISO“</span><span style="font-family: Arial; font-size: 10pt"> </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">ISO-values from 100 to 3200 in 1/3 stops </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 1"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span style="font-family: Arial; font-size: 10pt">„2:WB“ </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">white-balance (the original 8 plus ColorTemp) </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 2"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span style="font-family: Arial; font-size: 10pt">„3:CTemp“ </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">custom color temp from 1800K to 11000K in 100K steps </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 3"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span style="font-family: Arial; font-size: 10pt">„4:Metering“ </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">light metering, the original three (fullframe, center-weighted, partial) plus spot </span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">metering</span></p>
1. First You need to make camera read bootable CF card. For that you need a CF card reader and look in the mentioned earlier thread
 
  +
|- style="height: 15.4pt; mso-yfti-irow: 4"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span style="font-family: Arial; font-size: 10pt">„5:AEB“ </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">exposure bracketing from +-0 to 6.7 EV in +/- x.0, x.3, x.5, x.7, for x = {0..6} </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 5"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span style="font-family: Arial; font-size: 10pt">„6:CF-BSeq/AutoC“ </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">bracketing sequence order (normal-under-over / under-normal-over) and </span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">autocancellation of bracketing on / off </span></p>
download this from forum [[http://chdk.setepontos.com/index.php?action=dlattach;topic=4202.0;attach=3586]]
 
  +
|- style="height: 15.4pt; mso-yfti-irow: 6"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span style="font-family: Arial; font-size: 10pt">„7:CF-SI Disp.“ </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">red focussing dots overlay on matt screen on / off </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 7"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span style="font-family: Arial; font-size: 10pt">„8:CF-Menu Posi.“ </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">wether it should remember menu position after poweroff-on</span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">(the setting 'Top Menu' </span><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">is faulty) </span></p>
2. Extract BOOTFLAG.BIN and BOOTFLAG.FIR and proceed to upgrade firmware in camera. Wait few minutes and turn camera off and on simply by pulling battery out.
 
  +
|- style="height: 15.4pt; mso-yfti-irow: 8"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span style="font-family: Arial; font-size: 10pt">„9:CF-Safe.Shift“ </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Av and Tv autoexpanding the given values - only if needed (if picture would </span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">otherwise </span><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">be over- or underexposed) </span></p>
3. Format CF card and make it bootable (the easiest way is to use Card Tricks software)
 
  +
|- style="height: 15.4pt; mso-yfti-irow: 9"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span style="font-family: Arial; font-size: 10pt">„10:CF-L.AFButt“ </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">changes behaviour of AF-pushbutton on Canon L IS supertele (not the AF-switch</span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">on </span><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">normal lens!) </span></p>
4. Get this: [[http://chdk.setepontos.com/index.php?action=dlattach;topic=4202.0;attach=3585]]
 
  +
|- style="height: 15.4pt; mso-yfti-irow: 10"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span style="font-family: Arial; font-size: 10pt">„11:CF-Decis.Da.“ </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">saves plenty of additional numeric decision data and sensor values in RAW and </span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">JPEG-EXIF (only for special software) </span></p>
5. Extract AUTOEXEC.BIN to fresly created bootable card and put it in camera.
 
  +
|- style="height: 15.4pt; mso-yfti-irow: 11"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span style="font-family: Arial; font-size: 10pt">„12:CF-Flash“ </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">switch flash on / off regardless of flash settings (either internal and flash socket) </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 12"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span style="font-family: Arial; font-size: 10pt">„13:Shutt.Count“ </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">total shutter counts </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 13"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN">„14:TimeLapse“</span><span style="font-family: Arial; font-size: 10pt"> </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Create pictures every [user set 1-999] sec.</span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Example : 100 x 5s --- take 100 pictures </span><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">at every 5 sec. </span></p>
6. From now if You put bootable card camera will blink with blue led(DP button) when booting.
 
  +
|- style="height: 15.4pt; mso-yfti-irow: 14"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Right – increase time by 1 sec </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 15"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Left – decrease time by 1 sec </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 16"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Play – increase # of pictures by 1 </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 17"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Menu – double # of pictures (after like 10 million it goes back to 0) </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 18"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Set – start sequence </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 19"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN">„15:AFPSelection” </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">how you can select the Auto Focus Point </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 20"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Standard : nothing changed from original set </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 21"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Wheel Off : you can NOT use the wheel when selecting AFP. You can still use</span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">the</span><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB"> Up, </span><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Down Left and Right button + the presets for APF (eg. : set + zoom out) </span></p>
To turn on ISO 3200 just enter any menu and press DP/Print button. You will hear "beep" sound if sound is turned on (just like one from AF) and iso will change to "100"
 
  +
|- style="height: 15.4pt; mso-yfti-irow: 22"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Blocked : You can only use the presets for APF (eg. : set + zoom out) </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 23"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN">„16:AFPoints 1” </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">set the Auto Focus Point </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 24"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">the AF helping light of my external flash doesn't work when you're using a set</span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">that </span><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">is </span><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">not standard. </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 25"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Use left/right in the info menu to move the cursor and set to activate/deactivate</span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">the </span><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">selected points. </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 26"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">If all points are selected in a set the menu will show </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 27"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">TLLCRRB </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 28"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">this stands for top, left, left-center, center, center-right, right, bottom. </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 29"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">the point where the cursor is set to will be in lowercase. non-selected points will</span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">show </span><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">a blank, with cursor set on them a @ </span></p>
And You know what?
 
  +
|- style="height: 15.4pt; mso-yfti-irow: 30"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span style="font-family: Arial; font-size: 10pt">„17:AFPoints 2” </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">see „16:AFPoints 1” </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 31"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN">„18:AFPoints 3” </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">see „16:AFPoints 1” </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 32"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN">„19:Review time” </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt">
  +
</p>
   
It works on my camera!
 
   
  +
# of seconds picture will be displayed after taking it. This can now be set to
  +
|- style="height: 15.4pt; mso-yfti-irow: 33"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Hold : display image until any button pressed </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 34"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">OFF: doesn’t display any image after picture was taken </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 35"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">1 to 30 sec : display image for user set time --- the maximum values are user </span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">settable </span><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">in the file user_settings.txt, they are not fixed to 30 s </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 36"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN">„20:AutoPowerOff” </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">puts camera into sleep mode. This setting can be set to : </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 37"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Off: never goes into sleep mode </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 38"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">1 to 60 min : goes into sleep mode after user set time (1 minute increments) --- </span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">the </span><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">maximum values are user settable in the file user_settings.txt, they are not </span></p>
   
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">fixed </span><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">to 60 min. </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 39"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN">„21:FlashExComp” </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">Flash Exposure Compensation. This setting can be set to : </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 40"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">-6 to +6 in 1/3 increments (standard was -2 to +2) </span></p>
  +
|- style="height: 15.4pt; mso-yfti-irow: 41; mso-yfti-lastrow: yes"
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 117.7pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="top" width="168"|
  +
<p style="margin: 0cm 0cm 0pt -0.1pt; mso-para-margin-left: -.01gd"><span lang="EN" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN">“Flash Ex Bracketing”</span><span style="font-family: Arial; font-size: 10pt"> </span></p>
  +
| nowrap="nowrap" style="border-bottom: #000000; border-left: #000000; padding-bottom: 0cm; background-color: transparent; padding-left: 3.5pt; width: 414pt; padding-right: 3.5pt; height: 15.4pt; border-top: #000000; border-right: #000000; padding-top: 0cm" valign="bottom" width="592"|
  +
<p style="margin: 0cm 0cm 0pt"><span lang="EN-GB" style="font-family: Arial; font-size: 10pt; mso-ansi-language: EN-GB">l/r:+- exposure menu/jump: +- time </span></p>
  +
|}
  +
The menu will appear as usual, ISO, WB and metering settings won't show up in the menu structure, they show up in the small display and on the modified INFO screen only. Some edited values withstand battery removal and booting normally without prepared CF card, so don't be surprised.
   
   
  +
'''Short cuts''':
   
  +
Quality menu (can be configured to be available via the SET button in the custom functions)<br />zoom-out: af points set 1<br />zoom-in: af points set 2<br />direct-print: af points set 3
----
 
 
   
  +
ISO menu:<br />
  +
zoom-out: ISO 100<br />
  +
zoom-in: ISO 3200<br />
  +
direct-print: ISO 400
   
Just found firmware update for this camera: http://web.canon.jp/imaging/eosdigital2/e3kr2_firmware-e.html
 
   
  +
AF menu:<br />zoom-out:<br />LCD brightness level: 1<br />
It claims to be V1.0.3 for a Digital Rebel XT (350d) Which is exactly what version my 350d has on it.
 
  +
zoom-in: LCD brightness level: 5<br />
  +
direct-print: LCD brightness level: 3
   
Perhaps a port for this camera? I can't get IDA to work, must you have the full (pay) version, or will the free one work, the free version i have does not support ARM processors, otherwise I'd get to work...
 
   
  +
WB menu:<br />
  +
zoom-out: Kelvin<br />
  +
zoom-in: Auto BW<br />
  +
direct-print: Custom WB (automatically picks the last image)
   
   
  +
measuring method menu:<br />
== Info from the forum: ==
 
  +
zoom-out: go to '''beep menu '''<br />
[http://chdk.setepontos.com/index.php/topic,3863.msg36254.html http://chdk.setepontos.com/index.php/topic,3863.msg36254.html]&nbsp;:
 
  +
zoom-in: spot measurement<br />
  +
direct-print: go to parameter menu
   
   
  +
beep menu:<br />
:Hi <br /><br />Any peoples working on EOS 350d&nbsp;? <br /><br />I just tried to compile the ledscan downloaded from here http://chdk.setepontos.com/index.php/topic,1586.0.html<br /><br />and run it on my 350d, <br /><br />it works!! <br /><br />address of CF card access LED(red) = 0xC02200A0
 
  +
zoom-out: toggle flash on/off (red led flashes to show flash is enabled, blue led to show disabled)
:
 
  +
<br />zoom-in: toggle safety shift on/off (red enabled, blue disabled)<br />
:---
 
  +
direct-print: toggle mirror lock-up (red enabled, blue disabled)
:I just want to repeat some "known" facts:<br />- there are no problems with decryption of official FW so you actually do not need to make dump to analyse FW.<br />- no one with programming skills have done anything usefull for quite long time for this type of camera.- this camera is outdated by now and maybe it explains why there are no more attempts to hack it.
 
:
 
:---
 
:
 
:I use the entry.s and scanled.c only with the below commands,<br /><br />arm-elf-gcc -fno-builtin -O2 -Ilib -nostdinc -c entry.s<br />arm-elf-gcc -fno-builtin -O1 -Ilib -c scanled.c<br />arm-elf-gcc -fno-builtin -O2 -Ilib -nostdlib -Wl,-N,-Ttext,1900 -o scanled.exec entry.o scanled.o -lgcc<br />arm-elf-objcopy -O binary scanled.exec scanled.bin<br />decrypt20d.exe scanled.bin scanled.fir
 
 
[[Category:Cameras]]
 
[[Category:Cameras]]
  +
[[Category:DSLR]]

Revision as of 22:18, 31 March 2014

Warning

CHDK is not available for this camera. There is different hack (not CHDK!) available but please read the entire development thread before you try it. More than one user has had problems which they were not able to recover. Many, but not all of these were caused by not having Firmware 1.0.3 on the camera before performing the modification. It is your responsibility to understand the risks before you proceed.

SERIOUSLY YOU COULD DESTROY YOUR CAMERA IGNORE THIS AT YOUR OWN RISK

The Canon Rebel Digital XT (North America) / EOS Kiss n Digital (Japan) / EOS 350D (Elsewhere) is the successor of the EOS 300D.

EOS 350D all

EOS 350D All Color Options

EOS 350D front

EOS 350D Front

EOS 350D back

EOS 350D Back

Reviews

Technical data

Camera specifications: 350D@Canon USA

  • Sensor: 8.0 million effective pixels, 22.2 x 14.8 mm CMOS type
  • DigiC II image processor, based on ARM946E-S core (32 bits RISC CPU)
  • VxWorks 5.5 real-time embedded operating system, from Wind River Inc.
  • Display: 1.8" TFT, 115,000 pixels
  • Optical pentamirror viewfinder
  • Storage: Compact Flash Type I or II and Microdrive
  • Battery: Canon Li-ion Battery NB-2LH
  • Dimensions: 27 x 94 x 64 mm, Weight: 490g without battery, lens, and CF
  • Speed: Approx 3.0 fps continous shooting up to 14 JPEG / 4 RAW frames

Instructions

Warning

Read the entire development thread before you try this. More than one user has had problems which they were not able to recover. Many, but not all of these were caused by not having Firmware 1.0.3 on the camera before performing the modification. It is your responsibility to understand the risks before you proceed.


By homeshopmachinist [1]

I'm linking to some files he's hosting but you should probably check the dev[2] thread as there are more recent versions, or check this mediafire share if the old links break.



Make sure battery is FULLY CHARGED.

Camera MUST be firmware ver 1.0.3!

Before you begin, check your camera's firmware version by pressing menu and pressing the right arrow button to get to the last section on the top line of the menu. If the firmware version is not 1.0.3, go to this page and follow the instructions there. -> http://web.canon.jp/imaging/eosdigital2/e3kr2_firmware-e.html

Otherwise if you are already running firmware version 1.0.3, proceed to step one below.

Note: A later version of the original scanled.fir file referred to in step one may be safer and less likely to result in a bricked camera. That file is bootflg2.fir. [3] It was posted in reply #342 in the 350D thread. The discussion leading to the development of this later version began in reply #329. [4] Please carefully review the ReadMe.txt file included with the bootflg2 file.

1. Format your CF card. Copy scanled.fir [5] to the card.

2. Insert CF to camera and run firmware update from the bottom choice of the 5th Menu setup screen. Screen will show "CF card containing firmware is required to update". Wait for blue LED to light steady. Wait another 30 seconds.

3. Turn off camera and take battery out and back in. Leave it off.

4. Insert CF card in card reader. If your card is bigger than 4GB, go to step 6! Cardtricks can't handle FAT32, which is required to use bigger cards. Run Cardtricks and select the CF card by clicking on the picture of a memory card. Format the card in Cardtricks using the format button. (if you are using a Macintosh, format the card in the camera and use MacBoot in the following step to make the card bootable)

5. Check "CF boot sector" at the bottom right of the Cardtricks screen and then click "make bootable." Cardtricks will tell you to switch on the 'write protect switch'. CF cards do not have this, so don't worry about it. (Mac users can use MacBoot to accomplish this step.)

6. for cards bigger than 4GB, or if you simply want to have FAT32 instead of FAT16, don't use Card tricks. Check out the guide on making bootable FAT32 cards HERE. It's written for windows users, but you should be able to figure this out with other operating systems if you are a bit of a computer person.

7. Copy the autoexec.bin in 350D-20101011.zip [6] or one of the other autoexec.bin files published in the development forum thread into the root directory to the CF card, i.e. X:\autoexec.bin - not into any subdirectory.

8. Insert CF in the camera. If the camera is booting from the card the Blue LED will flash.

9. REMEMBER: After performing these steps, the camera will work normally with normal non-bootable CF cards. With a bootable card It will automatically boot the hack from an autoexec.bin file. It will however not work at all with bootable cards that don't contain a functioning autoexec.bin!

The only change to the camera is done in the above step 2. all the other steps only change your CF card and are erased by formatting it. This change to the camera from step 2 is reversible. For info on this check out the forum discussion.


Please note that after step 4 above :

When the camera is powered on, it will behave as follows:
- Without a card in: Warning message "No CF card" will be displayed on LCD screen..
- Without a bootable card: No message displayed on LCD screen (default behavior of camera).
- With a bootable card in and a correct AUTOEXEC.BIN file in the root directory of the card, the camera will execute the AUTOEXEC.BIN file, no message displayed on LCD screen..
- With a bootable card in that does not contain an AUTOEXEC.BIN, or contains a bad AUTOEXEC.BIN file, the camera will turn on and show a message on the LCD screen about the lack of an AUTOEXEC.BIN file.

Instuctions on using the additional functions

All features are accessed through the info button:

„1:ISO“

ISO-values from 100 to 3200 in 1/3 stops

„2:WB“

white-balance (the original 8 plus ColorTemp)

„3:CTemp“

custom color temp from 1800K to 11000K in 100K steps

„4:Metering“

light metering, the original three (fullframe, center-weighted, partial) plus spot

metering

„5:AEB“

exposure bracketing from +-0 to 6.7 EV in +/- x.0, x.3, x.5, x.7, for x = {0..6}

„6:CF-BSeq/AutoC“

bracketing sequence order (normal-under-over / under-normal-over) and

autocancellation of bracketing on / off

„7:CF-SI Disp.“

red focussing dots overlay on matt screen on / off

„8:CF-Menu Posi.“

wether it should remember menu position after poweroff-on

(the setting 'Top Menu' is faulty)

„9:CF-Safe.Shift“

Av and Tv autoexpanding the given values - only if needed (if picture would

otherwise be over- or underexposed)

„10:CF-L.AFButt“

changes behaviour of AF-pushbutton on Canon L IS supertele (not the AF-switch

on normal lens!)

„11:CF-Decis.Da.“

saves plenty of additional numeric decision data and sensor values in RAW and

JPEG-EXIF (only for special software)

„12:CF-Flash“

switch flash on / off regardless of flash settings (either internal and flash socket)

„13:Shutt.Count“

total shutter counts

„14:TimeLapse“

Create pictures every [user set 1-999] sec.

Example : 100 x 5s --- take 100 pictures at every 5 sec.

Right – increase time by 1 sec

Left – decrease time by 1 sec

Play – increase # of pictures by 1

Menu – double # of pictures (after like 10 million it goes back to 0)

Set – start sequence

„15:AFPSelection”

how you can select the Auto Focus Point

Standard : nothing changed from original set

Wheel Off : you can NOT use the wheel when selecting AFP. You can still use

the Up, Down Left and Right button + the presets for APF (eg. : set + zoom out)

Blocked : You can only use the presets for APF (eg. : set + zoom out)

„16:AFPoints 1”

set the Auto Focus Point

the AF helping light of my external flash doesn't work when you're using a set

that is not standard.

Use left/right in the info menu to move the cursor and set to activate/deactivate

the selected points.

If all points are selected in a set the menu will show

TLLCRRB

this stands for top, left, left-center, center, center-right, right, bottom.

the point where the cursor is set to will be in lowercase. non-selected points will

show a blank, with cursor set on them a @

„17:AFPoints 2”

see „16:AFPoints 1”

„18:AFPoints 3”

see „16:AFPoints 1”

„19:Review time”


  1. of seconds picture will be displayed after taking it. This can now be set to

Hold : display image until any button pressed

OFF: doesn’t display any image after picture was taken

1 to 30 sec : display image for user set time --- the maximum values are user

settable in the file user_settings.txt, they are not fixed to 30 s

„20:AutoPowerOff”

puts camera into sleep mode. This setting can be set to :

Off: never goes into sleep mode

1 to 60 min : goes into sleep mode after user set time (1 minute increments) ---

the maximum values are user settable in the file user_settings.txt, they are not

fixed to 60 min.

„21:FlashExComp”

Flash Exposure Compensation. This setting can be set to :

-6 to +6 in 1/3 increments (standard was -2 to +2)

“Flash Ex Bracketing”

l/r:+- exposure menu/jump: +- time

The menu will appear as usual, ISO, WB and metering settings won't show up in the menu structure, they show up in the small display and on the modified INFO screen only. Some edited values withstand battery removal and booting normally without prepared CF card, so don't be surprised.


Short cuts:

Quality menu (can be configured to be available via the SET button in the custom functions)
zoom-out: af points set 1
zoom-in: af points set 2
direct-print: af points set 3

ISO menu:
zoom-out: ISO 100
zoom-in: ISO 3200
direct-print: ISO 400


AF menu:
zoom-out:
LCD brightness level: 1
zoom-in: LCD brightness level: 5
direct-print: LCD brightness level: 3


WB menu:
zoom-out: Kelvin
zoom-in: Auto BW
direct-print: Custom WB (automatically picks the last image)


measuring method menu:
zoom-out: go to beep menu
zoom-in: spot measurement
direct-print: go to parameter menu


beep menu:
zoom-out: toggle flash on/off (red led flashes to show flash is enabled, blue led to show disabled)
zoom-in: toggle safety shift on/off (red enabled, blue disabled)
direct-print: toggle mirror lock-up (red enabled, blue disabled)